Currently, it exists only for compatibility and is never used. A limited or a directed uses 0 instead of (binary) 1 and corresponds to addresses such as 0.0.0.0 or 172.16.1.0/255.255.255.0.
In general, the use of this broadcast seems to be more often. It is known because it sends to a specific network address (directly). When broadcasting to this address, all computers with the network address “192.168.1.0/255.255.255.0” become communication targets. This is an address in which it leaves the network address part as it is, and it only sets the host address part to all 1.įor example, if there is a network address of “192.168.1.0/255.255.255.0” (this is the same as 192.168.1.0/24), this host address part (lower 8 bits) is all 1 Then, the IP address “192.168.1.255” becomes the directed. It can only send computers on the local network segment. It is not sent to other segments connected via the router. When data is broadcasted to this address, the data is transmitted to all computers connected to the network segment (in the case of Ethernet, one Ethernet segment). It is an IP address with all bits set to 1. 256-248 8, this means the last octet 0-255 is broken up into 32 groups of 8. Limited Broadcast Address (all one broadcast address) So the subnet mask will be 255.255.255.248. There are two types of used at this time: limited broadcast and directed broadcast.
#255 255 255 0.8 mac#
In the MAC address used in Ethernet, etc., “FF: FF: FF: FF: FF: FF,” all bits of which are 1, is a, and the frame reaches all nodes in the same segment.Īlso Read: What is a BPDU (Bridge Protocol Data Unit)? – Definition, Switch, and More Types The use of an unconfigured terminal just connected to the network for a special purpose, such as searching for a server that teaches setting information. It is not transferred to another network via a relay device such as a router. The format determines for each protocol ( communication protocol).Ī packet or frame transmitted by specifying a broadcast address delivers to all other nodes in the network.
0 kommentar(er)
